Faulty brazed joints often lead to premature component failure and cause enormously high costs. In many cases, the cause of the defect can be traced back to an improper selection of the brazing method, the brazing alloy or the brazing process parameters as well as a design that is not correct for brazing. This improper design of the brazed joint and the brazing process is often due to insufficient technical knowledge.
The aim of the seminar is to impart specialist knowledge on the manufacture of defect-free brazing and high-temperature brazing joints.
In the seminar, the basic definitions and terms as well as the requirements for brazing are taught. Existing brazing processes, brazing alloys and fluxes and their properties are presented and the corresponding application examples are explained. Design topics such as the dimensioning of brazing gaps and overlap lengths are dealt with in detail, as are the definition, evaluation and avoidance of possible imperfections in brazed joints. Based on a structured approach to the design of brazed joints, participants will be able to define brazing processes, brazing alloy and flux as well as brazing process parameters to produce defect-free brazed joints.
The seminar is aimed at technicians and engineers, primarily from the areas of production, development and quality management.
To register, please complete the registration form in full and send it to my e-mail address, by fax or to the postal address. To participate in the online seminar, you will receive a Zoom-link after successful registration.
Next online seminar dates:
28th to 29th of September 2022
30th of November to 1st of December 2022
Seminar fee: 750,00 Euro plus applicable VAT.
Online seminar program:
Day 1 from 9.00 a.m. to 1.00 p.m.
Basics of brazing technology
Brazing alloys and fluxes
Day 2 from 9.00 a.m. to 12.30 p.m.
Design of brazed joints
Imperfections of brazed joints and their testing
Selection of brazing process, brazing alloy, flux and process parameters
Of course, the seminar can also be offered individually for your company as an online seminar or classroom event. In case of interest please get in contact with me.