Brazing - an introduction

Brazing and high-temperature brazing are industrially established processes for joining metallic materials. Different heating processes are available for carrying out the brazing processes, which can be selected depending on the size and number of components. In addition, there is a wide range of brazing alloys from which the brazing material suitable for the respective application can be determined.

"Brazing - An Introduction" is intended as an introduction to the subject of brazing and high-temperature brazing and is aimed at people from all technical and commercial areas who would like to gain an overview of the possibilities of this joining technique.

Therefore, in the course of the event, I go into "brazing" terms and explain the prerequisites for brazing as well as the base materials that are suitable for brazing. Furthermore, I explain the different brazing processes, brazing materials and fluxes, point out special features of brazing appropriate design and show a procedure for selecting brazing processes, brazing material and flux.

The aim of the event is to give participants an overview of the possibilities of brazing. I offer more detailed expertise in my seminar "Brazing and High Temperature Brazing".

The next event dates are
Thursday, 22nd of September 2022, 09.00-10.00 a.m.
Wednesday, 17th of November 2022, 10.30-11.30 a.m.

To register, please send me an email at hs@schmoor-brazing.com with the keyword "registration" and the desired date. You will then receive a zoom link for participation in good time before the event.

Faulty brazed joints often lead to premature component failure and cause enormously high costs. In many cases, the cause of the defect can be traced back to an improper selection of the brazing method, the brazing alloy or the brazing process parameters as well as a design that is not correct for brazing. This improper design of the brazed joint and the brazing process is often due to insufficient technical knowledge.

The aim of the seminar is to impart specialist knowledge on the manufacture of defect-free brazing and high-temperature brazing joints.

In the seminar, the basic definitions and terms as well as the requirements for brazing are taught. Existing brazing processes, brazing alloys and fluxes and their properties are presented and the corresponding application examples are explained. Design topics such as the dimensioning of brazing gaps and overlap lengths are dealt with in detail, as are the definition, evaluation and avoidance of possible imperfections in brazed joints. Based on a structured approach to the design of brazed joints, participants will be able to define brazing processes, brazing alloy and flux as well as brazing process parameters to produce defect-free brazed joints.

The seminar is aimed at technicians and engineers, primarily from the areas of production, development and quality management.

To register, please complete the registration form in full and send it to my e-mail address, by fax or to the postal address. To participate in the online seminar, you will receive a Zoom-link after successful registration.

Next online seminar dates:
28th to 29th of September 2022
30th of November to 1st of December 2022

Seminar fee: 750,00 Euro plus applicable VAT.

Online seminar program:

Day 1 from 9.00 a.m. to 1.00 p.m.
    Basics of brazing technology
    Brazing process
    Brazing alloys and fluxes

Day 2 from 9.00 a.m. to 12.30 p.m.
    Design of brazed joints
    Imperfections of brazed joints and their testing
    Selection of brazing process, brazing alloy, flux and process parameters

Of course, the seminar can also be offered individually for your company as an online seminar or classroom event. In case of interest please get in contact with me.